Heat Press Time & Temperature Calculator

Use this quick guide to find the recommended temperature, time, pressure, and peel instructions for your transfer type and application. Settings may vary slightly depending on your heat press, fabric, and material, so we always recommend testing before full production.

DTF Transfers

DTF on Cotton

Temperature: 325°F
Time: 15 seconds
Pressure: Medium to medium-firm
Peel: Instant peel

DTF on Polyester

Temperature: 315°F
Time: 10 seconds
Pressure: Medium to medium-firm
Peel: Instant peel

DTF on Nylon

Temperature: 275°F
Time: 15 seconds
Pressure: Medium to medium-firm
Peel: Cold peel

Sublimation Transfers

Sublimation on Polyester Shirts

Temperature: 390°F
Time: 45 seconds
Pressure: Medium to medium-firm
Peel: Remove paper after pressing

Sublimation on Ceramic

Temperature: 410°F
Time: 110 seconds
Pressure: Medium to medium-firm
Peel: Remove paper after pressing

UV DTF Transfers

UV DTF transfers are peel and stick. For best results, clean the surface first to remove dust, oils, or residue before applying the transfer.

Temperature: No heat press needed
Time: Apply by hand
Pressure: Firm hand pressure
Peel: Peel and stick

Screen Printed Transfers

Elastoflex Screen Printed Transfers

Temperature: 325°F
Time: 10 seconds
Pressure: Medium to medium-firm
Peel: Hot peel

Super Opaque Hot Peel Screen Printed Transfers

Temperature: 370°F
Time: 15 seconds
Pressure: Medium to medium-firm
Peel: Hot peel

Pressing Tips

For best results, make sure your heat press is fully heated before pressing. Apply even pressure across the entire transfer area and avoid pressing over seams, zippers, buttons, or uneven surfaces when possible.

Because every heat press can vary slightly, we recommend testing your settings before completing a large order.